Finite Element Modeling of High Strength Reinforced Concrete Slabs

KHALID, HEIZA and MOHAMED, KANDIL and MONEIR, SOLIMAN (2014) Finite Element Modeling of High Strength Reinforced Concrete Slabs. In: International Conference on Advances in Civil, Structural and Construction Engineering - CSCE 2014, 07- 08 June,2014, Rome, Italy.

[img]
Preview
Text
20140712_103042.pdf - Published Version

Download (817kB) | Preview
Official URL: https://www.seekdl.org/conferences/paper/details/3...

Abstract

The analysis of Reinforced Concrete (RC) structures by using finite element techniques takes great attentions through the last two decades. A lot of finite element packages like ANSYS, ABAQUS, COSMOS, Dyna-3D, and NASTRAN have been modified to be used in the analysis of different elements of RC structures. In this paper ANSYS finite element software was used to analyze the structural behavior of high strength RC slabs. The analysis of RC slabs was considered in three dimensions finite element analysis, where effects of material and geometric nonlinearities were taken into consideration to increase the accuracy of the results. Flexural capacity of RC slabs was measured experimentally and calculated analytically using ANSYS. Comparisons between experimental and analytical results were performed. Comparisons between typical cracks patterns and modes of failure were comparable.

Item Type: Conference or Workshop Item (Paper)
Uncontrolled Keywords: Flexural capacity, High strength concrete, Material nonlineaities, Reinforcement ratio, Silica fume, Deflection, Finite element, ANSYS.
Depositing User: Mr. John Steve
Date Deposited: 21 May 2019 09:08
Last Modified: 21 May 2019 09:08
URI: http://publications.theired.org/id/eprint/2557

Actions (login required)

View Item View Item